C.R.Laurence
Il vostro conto  Vedere il carrello  AccediEsci
Cerca


Ingrandire l'immagine

Catalog Number: UV602L85


  • Bonds Laminated Glass

  • UV and Visible Light Cure

  • Medium Viscosity with Capillary Action
  • Optically Clear
  • Best Adhesion to Plastics
  • Acceptable Bondline Gap: 0.5 to 1 mil (.0127 to .0254 mm)
  • Tensile/Shear Strength: 1450 psi

  • CRL UV602 is a medium viscosity, 100% solids, UV/Visible light curable adhesive that bonds to a variety of substrates such as glass, laminated glass, metal, ceramic, and many plastics. It has good capillary action with glass up to 1/4" (6 mm) thick. For thicker glass apply to the bonding surface prior to assembly. Of particular interest is its suitability for bonding laminated safety glass. The PVB film between laminated glass panes absorbs almost all of the UVA radiation, but because this adhesive has been made to also cure by daylight, it reacts with the remaining radiation (above 380nm) and cures completely. Butt-edge bonding is also no problem, as the adhesive does not affect the PVB film.



    CRL UV602 UV/Visible Light Adhesive - 85g


     


    Altri prodotti/finiture:

    NUMERO ARTICOLO DESCRIZIONE
    UV602L1K CRL UV602 UV/Visible Light Adhesive - 1000g
    UV602L85 CRL UV602 UV/Visible Light Adhesive - 85g

    Numero articolo:UV602L85
    Disponibile anche in questi cataloghi:
    CRL73R Tools, Machinery, and Equipment, PAGINA 320K
    CRL23R Frameless Shower Door and Mirror Hardware, PAGINA 497J
    GG2014A European Glass & Glazing, PAGINA E026
    CRL03 Sealants, Adhesives, and Fasteners, PAGINA N414
    Spedire via::Si può spedire con UPS

    Cured bonds of CRL UV602 are optically clear, extremely flexible and demonstrate outstanding elongation, making this adhesive ideal for bonding different material combinations. Bonds are tough, durable, exhibit high vibration resistance, and are very resistant to moisture and yellowing. Store adhesive away from sunlight. CRL7528 Cleaner and Degreaser provides for optimum adhesion when used first to prepare the glass by removing any dirt and grease that is present.

    Note: When bonding plastics, always test first, as not all plastics can be bonded properly. Do not bond any coated parts (powder coated or galvanized) with this adhesive.

    Shelf Life: 18 months from lot # date on label

    Il peso delle spedizioni è nella maggior parte dei casi approssimato e non è stato ancora verificato. Se si desidera ottenere il peso esatto, in modo tale da determinare i costi di spedizione come richiesto per completare l'ordine, si prega di richiederlo prima di inviare l'ordine contattandoCRL Assistenza al cliente.Le immagini dei prodotti sono dello stesso prodotto o di una fedele rappresentazione. ColorsI coloripossono variare a seconda della scheda video del vostro computer o del monitor e di come icolorcolorisono stati regolati.